package printer;

# $Id: printer.pm,v 1.130 2002/03/10 18:04:32 tkamppeter Exp $





use common;
use run_program;


my $prefix = "";


my $PRINTER_DB_FILE = "/usr/share/foomatic/db/compiled/overview.xml";

my $FOOMATICCONFDIR = "/etc/foomatic"; 

my $FOOMATIC_DEFAULT_SPOOLER = "$FOOMATICCONFDIR/defaultspooler";

%spooler = (
    _("CUPS - Common Unix Printing System") => "cups",
    _("LPRng - LPR New Generation")         => "lprng",
    _("LPD - Line Printer Daemon")          => "lpd",
    _("PDQ - Print, Don't Queue")           => "pdq"
#    _("PDQ - Marcia, click here!")           => "pdq"
);
%spooler_inv = reverse %spooler;

%shortspooler = (
    _("CUPS")   => "cups",
    _("LPRng")  => "lprng",
    _("LPD")    => "lpd",
    _("PDQ")    => "pdq"
);
%shortspooler_inv = reverse %shortspooler;

%lprcommand = (
    "cups"   => "lpr-cups",
    "lprng"  => "lpr-lpd",
    "lpd"    => "lpr-lpd",
    "pdq"    => "lpr-pdq"
);

%printer_type = (
    _("Local printer")                              => "LOCAL",
    _("Remote printer")                             => "REMOTE",
    _("Printer on remote CUPS server")              => "CUPS",
    _("Printer on remote lpd server")               => "LPD",
    _("Network printer (TCP/Socket)")               => "SOCKET",
    _("Printer on SMB/Windows 95/98/NT server")     => "SMB",
    _("Printer on NetWare server")                  => "NCP",
    _("Enter a printer device URI")                 => "URI",
    _("Pipe job into a command")                    => "POSTPIPE"
);
%printer_type_inv = reverse %printer_type;



sub set_prefix($) { $prefix = $_[0]; }

sub default_printer_type($) { "LOCAL" }

sub spooler {
    # LPD is taken from the menu for the moment because the classic LPD is
    # highly unsecure. Depending on how the GNU lpr development is going on
    # LPD support can be reactivated by uncommenting the line which is
    # commented out now.

    #return @spooler_inv{qw(cups lpd lprng pdq)};
    return @spooler_inv{qw(cups lprng pdq)};
}

sub printer_type($) {
    my ($printer) = @_;
    for ($printer->{SPOOLER}) {
	/cups/ && return @printer_type_inv{qw(LOCAL), 
					   qw(LPD SOCKET SMB), 
					   $::expert ? qw(URI) : ()};
	/lpd/  && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
					   $::expert ? qw(POSTPIPE URI) : ()};
	/lprng/  && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
					   $::expert ? qw(POSTPIPE URI) : ()};
	/pdq/  && return @printer_type_inv{qw(LOCAL LPD SOCKET),
					   $::expert ? qw(URI) : ()};
    }
}

sub get_default_spooler () {
    if (-f "$prefix$FOOMATIC_DEFAULT_SPOOLER") {
	open DEFSPOOL, "< $prefix$FOOMATIC_DEFAULT_SPOOLER";
	my $spool = <DEFSPOOL>;
	chomp $spool;
	close DEFSPOOL;
	if ($spool =~ /cups|lpd|lprng|pdq/) {
	    return $spool;
	}
    }
}

sub set_default_spooler ($) {
    my ($printer) = @_;
    # Make Foomatic config directory if it does not exist yet
    if (!(-d "$prefix$FOOMATICCONFDIR")) {mkdir "$prefix$FOOMATICCONFDIR";}
    # Mark the default driver in a file
    open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" || 
	die "Cannot create $prefix$FOOMATIC_DEFAULT_SPOOLER!";
    print DEFSPOOL $printer->{SPOOLER};
    close DEFSPOOL;
}

sub set_permissions {
    my ($file, $perms, $owner, $group) = @_;
    # We only need to set the permissions during installation to be able to
    # print test pages. After installation the devfsd daemon does the business
    # automatically.
    if (!$::isInstall) {return 1;}
    if ($owner && $group) {
        run_program::rooted($prefix, "/bin/chown", "$owner.$group", $file)
	    || die "Could not start chown!";
    } elsif ($owner) {
        run_program::rooted($prefix, "/bin/chown", $owner, $file)
	    || die "Could not start chown!";
    } elsif ($group) {
        run_program::rooted($prefix, "/bin/chgrp", $group, $file)
	    || die "Could not start chgrp!";
    }
    run_program::rooted($prefix, "/bin/chmod", $perms, $file)
	|| die "Could not start chmod!";
}

sub restart_service ($) {
    my ($service) = @_;
    # Exit silently if the service is not installed
    if (!(-x "$prefix/etc/rc.d/init.d/$service")) {
	return 1;
    }
    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "restart");
    if (($? >> 8) != 0) {
	return 0;
    } else {
	# CUPS needs some time to come up.
	if ($service eq "cups") {
	    wait_for_cups();
	}
	return 1;
    }
}

sub start_service ($) {
    my ($service) = @_;
    # Exit silently if the service is not installed
    if (!(-x "$prefix/etc/rc.d/init.d/$service")) {
	return 1;
    }
    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "start");
    if (($? >> 8) != 0) {
	return 0;
    } else {
	# CUPS needs some time to come up.
	if ($service eq "cups") {
	    wait_for_cups();
	}
	return 1;
    }
}

sub stop_service ($) {
    my ($service) = @_;
    # Exit silently if the service is not installed
    if (!(-x "$prefix/etc/rc.d/init.d/$service")) {
	return 1;
    }
    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "stop");
    if (($? >> 8) != 0) {return 0;} else {return 1;}
}

sub service_starts_on_boot ($) {
    my ($service) = @_;
    local *F; 
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" ||
	    return 0;
    while (my $line = <F>) {
	chomp $line;
	if ($line =~ /:on/) {
	    close F;
	    return 1;
	}
    }
    close F;
    return 0;
}

sub start_service_on_boot ($) {
    my ($service) = @_;
    run_program::rooted($prefix, "/sbin/chkconfig", "--add", $service)
	|| return 0;
    return 1;
}

sub SIGHUP_daemon {
    my ($service) = @_;
    if ($service eq "cupsd") {$service = "cups"};
    # PDQ has no daemon, exit.
    if ($service eq "pdq") {return 1};
    # CUPS needs auto-configuration
    if ($service eq "cups") {
        run_program::rooted($prefix, "/usr/sbin/setcupsconfig");
    }
    # Name of the daemon
    my $daemon;
    if (($service eq "lpr") || ($service eq "lpd") || ($service eq "lprng")) {
	$daemon = "lpd";
    } elsif ($service eq "cups") {
	$daemon = "cupsd";
    } elsif ($service eq "devfs") {
	$daemon = "devfsd";
    } else {
	$daemon = $service;
    }
    if ($service eq "cups") {
	# The current CUPS (1.1.13) dies on SIGHUP, to the normal restart.
	restart_service($service);
    } else {
	# Send the SIGHUP
	run_program::rooted($prefix, "/usr/bin/killall", "-HUP", $daemon);
    }
    # CUPS needs some time to come up.
    if ($service eq "cups") {
	wait_for_cups();
    }
    return 1;
}

sub wait_for_cups {
    # CUPS needs some time to come up. Wait up to 30 seconds, checking
    # whether CUPS is ready.
    my $cupsready = 0;
    my $i;
    for ($i = 0; $i < 30; $i++) {
	run_program::rooted($prefix, "/usr/bin/lpstat", "-r");
	if (($? >> 8) != 0) {
	    # CUPS is not ready, continue
	    sleep 1;
	} else {
	    # CUPS is ready, quit
	    $cupsready = 1;
	    last;
	}
    }
    return $cupsready;
}

sub assure_device_is_available_for_cups {
    # Checks whether CUPS already "knows" a certain port, it does not
    # know it usually when the appropriate kernel module is loaded
    # after CUPS was started or when the printer is turned on after
    # CUPS was started. CUPS 1.1.12 and newer refuses to set up queues
    # on devices which it does not know, it points these queues to
    # file:/dev/null instead. Restart CUPS if necessary to assure that
    # CUPS knows the device.
    my ($device) = @_;
    local *F; 
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" ||
	    die "Could not run \"lpinfo\"!";
    while (my $line = <F>) {
	if ($line =~ /$device/) { # Found a line containing the device name,
	                          # so CUPS knows it.
	    close F;
	    return 1;
	}
    }
    close F;
    return SIGHUP_daemon("cups");
}

sub network_running {
    # If the network is not running return 0, otherwise 1.
    local *F; 
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" ||
	    die "Could not run \"ifconfig\"!";
    while (my $line = <F>) {
	if (($line !~ /^lo\s+/) && # The loopback device can have been 
                                   # started by the spooler's startup script
	    ($line =~ /^(\S+)\s+/)) { # In this line starts an entry for a
	                              # running network
	    close F;
	    return 1;
	}
    }
    close F;
    return 0;
}

sub get_security_level {
    # Get security level by reading /etc/profile (only after install).
    # This is a preliminary solution until msec puts the security level
    # definition into the correct file.
    $file = "/etc/profile";
    if (-f $file) {
	local *F; 
	open F, "< $file" || return 0;
	while (my $line = <F>) {
	    if ($line =~ /^\s*SECURE_LEVEL=([0-5])\s*$/) {
		close F;
		return $1;
	    }
	}
	close F;
    }
    return 0;
}
    

sub spooler_in_security_level {
    # Was the current spooler already added to the current security level?
    my ($spooler, $level) = @_;
    my $sp;
    if (($spooler eq "lpr") || ($spooler eq "lprng")) {
	$sp = "lpd";
    } else {
	$sp = $spooler;
    }
    $file = "$prefix/etc/security/msec/server.$level";
    if (-f $file) {
	local *F; 
	open F, "< $file" || return 0;
	while (my $line = <F>) {
	    if ($line =~ /^\s*$sp\s*$/) {
		close F;
		return 1;
	    }
	}
	close F;
    }
    return 0;
}

sub add_spooler_to_security_level {
    my ($spooler, $level) = @_;
    my $sp;
    if (($spooler eq "lpr") || ($spooler eq "lprng")) {
	$sp = "lpd";
    } else {
	$sp = $spooler;
    }
    $file = "$prefix/etc/security/msec/server.$level";
    if (-f $file) {
	local *F; 
	open F, ">> $file" || return 0;
	print F "$sp\n";
	close F;
    }
    return 1;
}

sub files_exist {
    my @files = @_;
    for my $file (@files) {
	if (! -f "$prefix$file") {return 0;}
    }
    return 1;
}

sub set_alternative {
    my ($command, $executable) = @_;
    local *F;
    # Read the list of executables for the given command to find the number
    # of the desired executable
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" ||
	    die "Could not run \"update-alternatives\"!";
    my $choice = 0;
    while (my $line = <F>) {
	chomp $line;
	if ($line =~ m/^[\* ][\+ ]\s*([0-9]+)\s+(\S+)\s*$/) { # list entry?
	    if ($2 eq $executable) {
		$choice = $1;
		last;
	    }
	}
    }
    close F;
    # If the executable was found, assign the command to it
    if ($choice > 0) {
	system(($::testing ? "$prefix" : "chroot $prefix/ ") .
	       "/bin/sh -c \"/bin/echo $choice | update-alternatives --config $command > /dev/null 2>&1\"");
    }
    return 1;
}    

sub pdq_panic_button {
    my $setting = $_[0];
    if (-f "/usr/sbin/pdqpanicbutton") {
        run_program::rooted($prefix, "/usr/sbin/pdqpanicbutton", "--$setting")
	    || die "Could not $setting PDQ panic buttons!";
    }
}

sub copy_printer_params($$) {
    my ($from, $to) = @_;
    map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from; 
    
}

sub getinfo($) {
    my ($prefix) = @_;
    my $printer = {};
    my @QUEUES;

    set_prefix($prefix);

    # Initialize $printer data structure
    resetinfo($printer);

    return $printer;
}


sub resetinfo($) {
    my ($printer) = @_;
    $printer->{QUEUE} = "";
    $printer->{OLD_QUEUE} = "";
    $printer->{OLD_CHOICE} = "";
    $printer->{ARGS} = "";
    $printer->{DBENTRY} = "";
    $printer->{DEFAULT} = "";
    $printer->{currentqueue} = {};
    # -check which printing system was used previously and load the information
    # -about its queues
    read_configured_queues($printer);
}

sub read_configured_queues($) {
    my ($printer) = @_;
    my @QUEUES;
    # Get the default spooler choice from the config file
    $printer->{SPOOLER} ||= get_default_spooler();
    if (!$printer->{SPOOLER}) {
	
	my $spooler;
	for $spooler (qw(cups pdq lprng lpd)) {
	    
	    local *F; 
	    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
		"foomatic-configure -P -q -s $spooler |" ||
		    die "Could not run foomatic-configure";
	    eval (join('',(<F>))); 
	    close F;
	    
	    if ($#QUEUES != -1) {
		$printer->{SPOOLER} = $spooler;
		last;
	    }
	}
    } else {
	
	local *F; 
	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	    "foomatic-configure -P -q -s $printer->{SPOOLER} |" ||
		die "Could not run foomatic-configure";
	eval (join('',(<F>))); 
	close F;
    }
    $printer->{configured} = {};
    my $i;
    my $N = $#QUEUES + 1;
    for ($i = 0;  $i < $N; $i++) {
	$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}} = 
	    $QUEUES[$i];
	if ((!$QUEUES[$i]->{'make'}) || (!$QUEUES[$i]->{'model'})) {
	    if ($printer->{SPOOLER} eq "cups") {
		$printer->{OLD_QUEUE} = $QUEUES[$i]->{'queuedata'}{'queue'};
		my $descr = get_descr_from_ppd($printer);
		$descr =~ m/^([^\|]*)\|([^\|]*)\|.*$/;
		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= $1;
		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= $2;
		# Read out which PPD file was originally used to set up this
		# queue
		local *F;
		if (open F, "< $prefix/etc/cups/ppd/$QUEUES[$i]->{'queuedata'}{'queue'}.ppd") {
		    while (my $line = <F>) {
			if ($line =~ /^\*%MDKMODELCHOICE:(.+)$/) {
			    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = $1;
			}
		    }
		    close F;
		}
		# Mark that we have a CUPS queue but do not know the name
		# the PPD file in /usr/share/cups/model
		if (!$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'}) {
		    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = '1';
		}
		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'driver'} = 'CUPS/PPD';
		$printer->{OLD_QUEUE} = "";
		# Read out the printer's options
		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'} = read_cups_options($QUEUES[$i]->{'queuedata'}{'queue'});
	    }
	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= "";
	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= _("Unknown model");
	} else {
	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} = $QUEUES[$i]->{'make'};
	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} = $QUEUES[$i]->{'model'};
	}
	# Fill in "options" field
	if (my $args = $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'}) {
	    my $arg;
	    my @options;
	    for $arg (@{$args}) {
		push(@options, "-o");
		my $optstr = $arg->{'name'} . "=" . $arg->{'default'};
		push(@options, $optstr);
	    }
	    @{$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{options}} = @options;
	}
	# Construct an entry line for tree view in main window of
	# printerdrake
	make_menuentry($printer, $QUEUES[$i]->{'queuedata'}{'queue'});
    }
}

sub make_menuentry {
    my ($printer, $queue) = @_;
    my $spooler = $shortspooler_inv{$printer->{SPOOLER}};
    my $connect = $printer->{configured}{$queue}{'queuedata'}{'connect'};
    my $localremote;
    if (($connect =~ m!^file:!) || ($connect =~ m!^ptal:/mlc:!)) {
	$localremote = _("Local Printers");
    } else {
	$localremote = _("Remote Printers");
    }
    my $make = $printer->{configured}{$queue}{'queuedata'}{'make'};
    my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
    my $connection;
    if ($connect =~ m!^file:/dev/lp(\d+)$!) {
	my $number = $1;
	$connection = _(" on parallel port \#%s", $number);
    } elsif ($connect =~ m!^file:/dev/usb/lp(\d+)$!) {
	my $number = $1;
	$connection = _(", USB printer \#%s", $number);
    } elsif ($connect =~ m!^ptal:/(.+)$!) {
	my $ptaldevice = $1;
	if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
	    my $number = $1;
	    $connection = _(", multi-function device on parallel port \#%s",
			    $number);
	} elsif ($ptaldevice =~ /^mlc:usb:/) {
	    $connection = _(", multi-function device on USB");
	} elsif ($ptaldevice =~ /^hpjd:/) {
	    $connection = _(", multi-function device on HP JetDirect");
	} else {
	    $connection = _(", multi-function device");
	}
    } elsif ($connect =~ m!^file:(.+)$!) {
	$connection = _(", printing to %s", $1);
    } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) {
	$connection = _("on LPD server \"%s\", printer \"%s\"", $2, $1);
    } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) {
	$connection = _(", TCP/IP host \"%s\", port %s", $1, $2);
    } elsif (($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$!) ||
	     ($connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$!) ||
	     ($connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!)) {
	$connection = _("on Windows server \"%s\", share \"%s\"", $1, $2);
    } elsif (($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$!) ||
	     ($connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$!) ||
	     ($connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!)) {
	$connection = _("on Novell server \"%s\", printer \"%s\"", $1, $2);
    } elsif ($connect =~ m!^postpipe:(.+)$!) {
	$connection = _(", using command %s", $1);
    } else {
	$connection = ($::expert ? ", URI: $connect" : "");
    }
    my $sep = "!";
    $printer->{configured}{$queue}{'queuedata'}{'menuentry'} = 
	($::expert ? "$spooler$sep" : "") .
	"$localremote$sep$queue: $make $model$connection";
}

sub read_printer_db(;$) {

    my $spooler = $_[0];

    my $dbpath = $prefix . $PRINTER_DB_FILE;

    local $_; 

    local *DBPATH; 
    # Generate the Foomatic printer/driver overview, read it from the
    # appropriate file when it is already generated
    if (!(-f $dbpath)) {
	open DBPATH, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	    "foomatic-configure -O -q |" ||
		die "Could not run foomatic-configure";
    } else {
	open DBPATH, $dbpath or die "An error has occurred on $dbpath : $!";
    }

    my $entry = {};
    my $inentry = 0;
    my $indrivers = 0;
    my $inautodetect = 0;
    while (<DBPATH>) {
	chomp;
	if ($inentry) {
	    # We are inside a printer entry
	    if ($indrivers) {
		# We are inside the drivers block of a printers entry
		if (m!^\s*</drivers>\s*$!) {
		    # End of drivers block
		    $indrivers = 0;
		} elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
		    push (@{$entry->{drivers}}, $1);
		}
	    } elsif ($inautodetect) {
		# We are inside the autodetect block of a printers entry
		# All entries inside this block will be ignored
		if (m!^.*</autodetect>\s*$!) {
		    # End of autodetect block
		    $inautodetect = 0;
		}
	    } else {
		if (m!^\s*</printer>\s*$!) {
		    # entry completed
		    $inentry = 0;
		    # Expert mode:
		    # Make one database entry per driver with the entry name
		    # manufacturer|model|driver
		    if ($::expert) {
			my $driver;
			for $driver (@{$entry->{drivers}}) {
			    my $driverstr;
			    if ($driver eq "Postscript") {
				$driverstr = "PostScript";
			    } else {
				$driverstr = "GhostScript + $driver";
			    }
			    if ($driver eq $entry->{defaultdriver}) {
				$driverstr .= " (recommended)";
			    }
			    $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr";
			    $entry->{driver} = $driver;
			    # Duplicate contents of $entry because it is multiply entered to the database
			    map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
			}
		    } else {
			# Recommended mode
			# Make one entry per printer, with the recommended
			# driver (manufacturerer|model)
			$entry->{ENTRY} = "$entry->{make}|$entry->{model}";
			if ($entry->{defaultdriver}) {
			    $entry->{driver} = $entry->{defaultdriver};
			    map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
			}
		    }
		    $entry = {};
		} elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) {
		    # Foomatic printer ID
		    $entry->{printer} = $1;
		} elsif (m!^\s*<make>(.+)</make>\s*$!) {
		    # Printer manufacturer
		    $entry->{make} = uc($1);
		} elsif (m!^\s*<model>(.+)</model>\s*$!) {
		    # Printer model
		    $entry->{model} = $1;
		} elsif (m!<driver>(.+)</driver>!) {
		    # Printer default driver
		    $entry->{defaultdriver} = $1;
		} elsif (m!^\s*<drivers>\s*$!) {
		    # Drivers block
		    $indrivers = 1;
		    @{$entry->{drivers}} = (); 
		} elsif (m!^\s*<autodetect>\s*$!) {
		    # Autodetect block
		    $inautodetect = 1;
		}
	    }
	} else {
	    if (m!^\s*<printer>\s*$!) {
		# new entry
		$inentry = 1;
	    }
	}
    }
    close DBPATH;

    # Add raw queue
    if ($spooler ne "pdq") {
	$entry->{ENTRY} = _("Raw printer (No driver)");
	$entry->{driver} = "raw";
	$entry->{make} = "";
	$entry->{model} = _("Unknown model");
	map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
    }

    
    if (($spooler) && ($spooler eq "cups") && ($::expert)) {

	#&$install('cups-drivers') unless $::testing;
	#my $w;
	#if ($in) {
	#    $w = $in->wait_message(_("CUPS starting"),
	#			   _("Reading CUPS drivers database..."));
	#}
        poll_ppd_base();
    }

    @entries_db_short     = sort keys %printer::thedb;
    #%descr_to_db          = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short;
    #%descr_to_help        = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short;
    #@entry_db_description = keys %descr_to_db;
    #db_to_descr          = reverse %descr_to_db;

}

sub read_foomatic_options ($) {
    my ($printer) = @_;
    # Generate the option data for the chosen printer/driver combo
    my $COMBODATA;
    local *F;
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"foomatic-configure -P -q -p $printer->{currentqueue}{'printer'}" .
	    " -d $printer->{currentqueue}{'driver'}" . 
		($printer->{OLD_QUEUE} ?
		  " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
		($printer->{SPECIAL_OPTIONS} ?
		  " $printer->{SPECIAL_OPTIONS}" : "") 
		    . " |" ||
	    die "Could not run foomatic-configure";
    eval (join('',(<F>))); 
    close F;
    # Return the arguments field
    return $COMBODATA->{'args'};
}

sub read_cups_options ($) {
    my ($queue_or_file) = @_;
    # Generate the option data from a CUPS PPD file/a CUPS queue
    # Use the same Perl data structure as Foomatic uses to be able to
    # reuse the dialog
    local *F;
    if ($queue_or_file =~ /.ppd.gz$/) { # compressed PPD file
	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	    "gunzip -cd $queue_or_file | lphelp - |" || return 0;
    } else { # PPD file not compressed or queue
	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	    "lphelp $queue_or_file |" || return 0;
    }
    my $i;
    my $j;
    my @args = ();
    my $line;
    my $inoption = 0;
    my $inchoices = 0;
#    my $innumerical = 0;
    while ($line = <F>) {
	chomp $line;
	if ($inoption) {
	    if ($inchoices) {
		if ($line =~ /^\s*(\S+)\s+(\S.*)$/) {
		    push(@{$args[$i]{vals}}, {});
		    $j = $#{$args[$i]{vals}};
		    $args[$i]{vals}[$j]{value} = $1;
		    my $comment = $2;
		    # Did we find the default setting?
		    if ($comment =~ /default\)\s*$/) {
			$args[$i]{default} = $args[$i]{vals}[$j]{value};
			$comment =~ s/,\s*default\)\s*$//;
		    } else {
			$comment =~ s/\)\s*$//;
		    }
		    # Remove opening paranthese
		    $comment =~ s/^\(//;
		    # Remove page size info
		    $comment =~ s/,\s*size:\s*[0-9\.]+x[0-9\.]+in$//;
		    $args[$i]{vals}[$j]{comment} = $comment;
		} elsif (($line =~ /^\s*$/) && ($#{$args[$i]{vals}} > -1)) {
		    $inchoices = 0;
		    $inoption = 0;
		}
#	    } elsif ($innumerical == 1) {
#		if ($line =~ /^\s*The default value is ([0-9\.]+)\s*$/) {
#		    $args[$i]{default} = $1;
#		    $innumerical = 0;
#		    $inoption = 0;
#		}
	    } else {
		if ($line =~ /^\s*<choice>/) {
		    $inchoices = 1;
#		} elsif ($line =~ /^\s*<value> must be a(.*) number in the range ([0-9\.]+)\.\.([0-9\.]+)\s*$/) {
#		    delete($args[$i]{vals});
#		    $args[$i]{min} = $2;
#		    $args[$i]{max} = $3;
#		    my $type = $1;
#		    if ($type =~ /integer/) {
#			$args[$i]{type} = 'int';
#		    } else {
#			$args[$i]{type} = 'float';
#		    }
#		    $innumerical = 1;
		}
	    }
	} else {
	    if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<choice>\s*$/) {
#	    if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<.*>\s*$/) {
		$inoption = 1;
		push(@args, {});
		$i = $#args;
		$args[$i]{comment} = $1;
		$args[$i]{name} = $2;
		$args[$i]{type} = 'enum';
		@{$args[$i]{vals}} = ();
	    }
	}
    }
    close F;
    # Return the arguments field
    return \@args;
}



sub read_cups_printer_list {
    my ($printer) = $_[0];
    # This function reads in a list of all printers which the local CUPS
    # daemon currently knows, including remote ones.
    local *F;
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"lpstat -v |" || return ();
    my @printerlist = ();
    my $line;
    while ($line = <F>) {
	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
	    my $queuename = $1;
	    my $comment = "";
	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
		(!$printer->{configured}{$queuename})) {
		$comment = _("(on %s)", $1);
	    } else {
		$comment = _("(on this machine)");
	    }
	    push (@printerlist, "$queuename $comment");
	}
    }
    close F;
    return @printerlist;
}

sub get_cups_remote_queues {
    my ($printer) = $_[0];
    # This function reads in a list of all remote printers which the local 
    # CUPS daemon knows due to broadcasting of remote servers or 
    # "BrowsePoll" entries in the local /etc/cups/cupsd.conf/
    local *F;
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"lpstat -v |" || return ();
    my @printerlist = ();
    my $line;
    while ($line = <F>) {
	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
	    my $queuename = $1;
	    my $comment = "";
	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
		(!$printer->{configured}{$queuename})) {
		$comment = _("On CUPS server \"%s\"", $1);
		my $sep = "!";
		push (@printerlist,
		      ($::expert ? _("CUPS") . $sep : "") .
		      _("Remote Printers") . "$sep$queuename: $comment"
		      . ($queuename eq $printer->{DEFAULT} ?
			 _(" (Default)") : ("")));
	    }
	}
    }
    close F;
    return @printerlist;
}

sub set_cups_autoconf {
    my $autoconf = $_[0];

    # Read config file
    local *F;
    my $file = "$prefix/etc/sysconfig/printing";
    if (!(-f $file)) {
	@file_content = ();
    } else {
	open F, "< $file" or die "Cannot open $file!";
	@file_content = <F>;
	close F;
    }

    # Remove all valid "CUPS_CONFIG" lines
    ($_ =~ /^\s*CUPS_CONFIG/ and $_="") foreach @file_content;
 
    # Insert the new "Printcap" line
    if ($autoconf) {
	push @file_content, "CUPS_CONFIG=automatic\n";
    } else {
	push @file_content, "CUPS_CONFIG=manual\n";
    }

    # Write back modified file
    open F, "> $file" or die "Cannot open $file!";
    print F @file_content;
    close F;

    # Restart CUPS
    restart_service("cups");

    return 1;
}

sub get_cups_autoconf {
    local *F;
    open F, ("< $prefix/etc/sysconfig/printing") || return 1;
    my $line;
    while ($line = <F>) {
	if ($line =~ m!^[^\#]*CUPS_CONFIG=manual!) {
	    return 0;
	}
    }
    return 1;
}

sub set_default_printer {
    my ($printer) = $_[0];
    run_program::rooted($prefix, "foomatic-configure",
			"-D", "-q", "-s", $printer->{SPOOLER},
			"-n", $printer->{DEFAULT}) || return 0;
    return 1;
}

sub get_default_printer {
    my $printer = $_[0];
    local *F;
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"foomatic-configure -Q -q -s $printer->{SPOOLER} |" || return undef;
    my $line;
    while ($line = <F>) {
	if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) {
	    return $1;
	}
    }
    return undef;
}

sub read_cupsd_conf {
    my @cupsd_conf;
    local *F;

    open F, "$prefix/etc/cups/cupsd.conf";
    @cupsd_conf = <F>;
    close F;

    @cupsd_conf;
}
sub write_cupsd_conf {
    my (@cupsd_conf) = @_;
    local *F;

    open F, ">$prefix/etc/cups/cupsd.conf";
    print F @cupsd_conf;
    close F;

    
    restart_service("cups");
}

sub read_printers_conf {
    my ($printer) = @_;
    my $current = undef;

    
    
    
    
    
    
    
    local *PRINTERS; open PRINTERS, "$prefix/etc/cups/printers.conf" or return;
    local $_;
    while (<PRINTERS>) {
	chomp;
	/^\s*#/ and next;
	if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
	elsif (/\s*<\/Printer>/) { $current->{QUEUE} && $current->{DeviceURI} or next; 
				   add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
	elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
    }
    close PRINTERS;

    
    $printer->{SPOOLER} ||= 'cups';
}

sub get_direct_uri {
    
    my @direct_uri;
    local *F; open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/sbin/lpinfo -v |";
    local $_;
    while (<F>) {
	/^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2;
    }
    close F;
    @direct_uri;
}

sub get_descr_from_ppd {
    my ($printer) = @_;
    my %ppd;

    
    local *F; open F, "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd" or return "|" . _("Unknown model");
    # "OTHERS|Generic PostScript printer|PostScript (en)";
    local $_;
    while (<F>) {
	/^\*([^\s:]*)\s*:\s*\"([^\"]*)\"/ and do { $ppd{$1} = $2; next };
	/^\*([^\s:]*)\s*:\s*([^\s\"]*)/   and do { $ppd{$1} = $2; next };
    }
    close F;

    my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName});
    # Apply the beautifying rules of poll_ppd_base
    if ($descr =~ /Foomatic \+ Postscript/) {
	$descr =~ s/Foomatic \+ Postscript/PostScript/;
    } elsif ($descr =~ /Foomatic/) {
	$descr =~ s/Foomatic/GhostScript/;
    } elsif ($descr =~ /CUPS\+GIMP-print/) {
	$descr =~ s/CUPS\+GIMP-print/CUPS \+ GIMP-Print/;
    } elsif ($descr =~ /Series CUPS/) {
	$descr =~ s/Series CUPS/Series, CUPS/;
    } elsif (!(uc($descr) =~ /POSTSCRIPT/)) {
	$descr .= ", PostScript";
    }

    # Split the $descr into model and driver
    my $model;
    my $driver;
    if ($descr =~ /^([^,]+), (.*)$/) {
	$model = $1;
	$driver = $2;
    } else {
	# Some PPDs do not have the ", <driver>" part.
	$model = $descr;
	$driver = "PostScript";
    }
    my $make = $ppd{Manufacturer};
    my $lang = $ppd{LanguageVersion};

    # Remove manufacturer's name from the beginning of the model name
    if (($make) && ($model =~ /^$make[\s\-]+([^\s\-].*)$/)) {
	$model = $1;
    }

    # Put out the resulting description string
    uc($make) . '|' . $model . '|' . $driver .
      ($lang && (" (" . lc(substr($lang, 0, 2)) . ")"));
}

sub poll_ppd_base {
    
    
    
    
    run_program::rooted($prefix, "ifconfig lo 127.0.0.1"); 
    start_service("cups");
    my $driversthere = scalar(keys %thedb);
    foreach (1..60) {
	local *PPDS; open PPDS, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/poll_ppd_base -a |";
	local $_;
	while (<PPDS>) {
	    chomp;
	    my ($ppd, $mf, $descr, $lang) = split /\|/;
	    if ($ppd eq "raw") {next;}
	    my ($model, $driver);
	    if ($descr) {
		if ($descr =~ /^([^,]+), (.*)$/) {
		    $model = $1;
		    $driver = $2;
		} else {
		    # Some PPDs do not have the ", <driver>" part.
		    $model = $descr;
		    $driver = "PostScript";
		}
	    }
	    # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the models
	    # do not appear twice
	    if ($mf eq "CANON") {
		$model =~ s/BJC\s+/BJC-/;
	    }
	    $ppd && $mf && $descr and do {
		my $key = "$mf|$model|$driver" . ($lang && " ($lang)");
	        $thedb{$key}{ppd} = $ppd;
		$thedb{$key}{driver} = $driver;
		$thedb{$key}{make} = $mf;
		$thedb{$key}{model} = $model;
	    }
	}
	close PPDS;
	scalar(keys %thedb) - $driversthere > 5 and last;
	
	sleep 1; 
    }

    #scalar(keys %descr_to_ppd) > 5 or die "unable to connect to cups server";

}







sub configure_queue($) {
    my ($printer) = @_;
    local *F;

    if ($printer->{currentqueue}{foomatic}) {
	
	
        run_program::rooted($prefix, "foomatic-configure", "-q",
			    "-s", $printer->{currentqueue}{'spooler'},
			    "-n", $printer->{currentqueue}{'queue'},
			    (($printer->{currentqueue}{'queue'} ne 
			      $printer->{OLD_QUEUE}) &&
			     ($printer->{configured}{$printer->{OLD_QUEUE}}) ?
			     ("-C", $printer->{OLD_QUEUE}) : ()),
			    "-c", $printer->{currentqueue}{'connect'},
			    "-p", $printer->{currentqueue}{'printer'},
			    "-d", $printer->{currentqueue}{'driver'},
			    "-N", $printer->{currentqueue}{'desc'},
			    "-L", $printer->{currentqueue}{'loc'},
			    @{$printer->{currentqueue}{options}}
			    ) or die "foomatic-configure failed";
    } elsif ($printer->{currentqueue}{ppd}) {
	
	
        run_program::rooted($prefix, "lpadmin",
			    "-p", $printer->{currentqueue}{'queue'},
#			    $printer->{State} eq 'Idle' && 
#			        $printer->{Accepting} eq 'Yes' ? ("-E") : (),
			    "-E",
			    "-v", $printer->{currentqueue}{'connect'},
			    ($printer->{currentqueue}{'ppd'} ne '1') ?
			        ("-m", $printer->{currentqueue}{'ppd'}) : (),
			    $printer->{currentqueue}{'desc'} ?
			        ("-D", $printer->{currentqueue}{'desc'}) : (),
			    $printer->{currentqueue}{'loc'} ? 
			        ("-L", $printer->{currentqueue}{'loc'}) : (),
			    @{$printer->{currentqueue}{options}}
			    ) or die "lpadmin failed";
	# Add a comment line containing the path of the used PPD file to the
	# end of the PPD file
	if ($printer->{currentqueue}{'ppd'} ne '1') {
	    open F, ">> $prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd";
	    print F "*%MDKMODELCHOICE:$printer->{currentqueue}{'ppd'}\n";
	    close F;
	}
	# Copy the old queue's PPD file to the new queue when it is renamed,
	# to conserve the option settings
	if (($printer->{currentqueue}{'queue'} ne 
	     $printer->{OLD_QUEUE}) &&
	    ($printer->{configured}{$printer->{OLD_QUEUE}})) {
	    system("echo yes | cp -f " .
		   "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd " .
		   "$prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd");
	}
    } else {
	# Raw queue
        run_program::rooted($prefix, "foomatic-configure", "-q",
			    "-s", $printer->{currentqueue}{'spooler'},
			    "-n", $printer->{currentqueue}{'queue'},
			    "-c", $printer->{currentqueue}{'connect'},
			    "-d", $printer->{currentqueue}{'driver'},
			    "-N", $printer->{currentqueue}{'desc'},
			    "-L", $printer->{currentqueue}{'loc'}
			    ) or die "foomatic-configure failed";
    }	  

    # Make sure that queue is active
    if ($printer->{SPOOLER} ne "pdq") {
        run_program::rooted($prefix, "foomatic-printjob",
			    "-s", $printer->{currentqueue}{'spooler'},
			    "-C", "up", $printer->{currentqueue}{'queue'});
    }

    # Check whether a USB printer is configured and activate USB printing if so
    my $useUSB = 0;
    foreach (values %{$printer->{configured}}) {
	$useUSB ||= $_->{'queuedata'}{'connect'} =~ /usb/ || 
	    $_->{DeviceURI} =~ /usb/;
    }
    $useUSB ||= ($printer->{currentqueue}{'queue'}{'queuedata'}{'connect'}
		 =~ /usb/);
    if ($useUSB) {
	my $f = "$prefix/etc/sysconfig/usb";
	my %usb = getVarsFromSh($f);
	$usb{PRINTER} = "yes";
	setVarsInSh($f, \%usb);
    }

    # Open permissions for device file when PDQ is chosen as spooler
    # so normal users can print.
    if ($printer->{SPOOLER} eq 'pdq') {
	if ($printer->{currentqueue}{'connect'} =~ m!^\s*file:(\S*)\s*$!) {
	    set_permissions($1,"666");
	}
    }

    # Make a new printer entry in the $printer structure
    $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'} =
        {};
    copy_printer_params($printer->{currentqueue},
      $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'});
    # Construct an entry line for tree view in main window of
    # printerdrake
    make_menuentry($printer, $printer->{currentqueue}{'queue'});

    # Store the default option settings
    $printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = {};
    if ($printer->{currentqueue}{foomatic}) {
	my $tmp = $printer->{OLD_QUEUE};
	$printer->{OLD_QUEUE} = $printer->{currentqueue}{'queue'};
	$printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = 
	    read_foomatic_options($printer);
	$printer->{OLD_QUEUE} = $tmp;
    } elsif ($printer->{currentqueue}{ppd}) {
	$printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} =
	    read_cups_options($printer->{currentqueue}{'queue'});
    }
    # Clean up
    delete($printer->{ARGS});
    $printer->{OLD_CHOICE} = "";
    $printer->{ARGS} = {};
    $printer->{DBENTRY} = "";
    $printer->{currentqueue} = {};
}

sub remove_queue($$) {
    my ($printer) = $_[0];
    my ($queue) = $_[1];
    run_program::rooted($prefix, "foomatic-configure", "-R", "-q",
			"-s", $printer->{SPOOLER},
			"-n", $queue);
    # Delete old stuff from data structure
    delete $printer->{configured}{$queue};
    delete($printer->{currentqueue});
    delete($printer->{ARGS});
    $printer->{OLD_CHOICE} = "";
    $printer->{ARGS} = {};
    $printer->{DBENTRY} = "";
    $printer->{currentqueue} = {};
    removeprinterfromapplications($printer, $queue);
}

sub restart_queue($) {
    my ($printer) = @_;
    my $queue = $printer->{QUEUE};

    # Restart the daemon(s)
    for ($printer->{SPOOLER}) {
	/cups/ && do {
	    
	    restart_service("cups");
	    last };
	/lpr|lprng/ && do {
	    
	    foreach (("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock")) {
		my $pidlpd = (cat_("$prefix$_"))[0];
		kill 'TERM', $pidlpd if $pidlpd;
		unlink "$prefix$_";
	    }
	    restart_service("lpd"); sleep 1;
	    last };
    }
    # Kill the jobs
    run_program::rooted($prefix, "foomatic-printjob", "-R",
			"-s", $printer->{SPOOLER},
			"-P", $queue, "-");

}

sub print_pages($@) {
    my ($printer, @pages) = @_;
    my $queue = $printer->{QUEUE};
    my $lpr = "/usr/bin/foomatic-printjob";
    my $lpq = "$lpr -Q";

    # Print the pages
    foreach (@pages) {
	my $page = $_;
	# Only text and PostScript can be printed directly with all spoolers,
	# images must be treated seperately
	if ($page =~ /\.jpg$/) {
	    system(($::testing ? "$prefix" : "chroot $prefix/ ") .
		   "/usr/bin/convert $page -page 427x654+100+65 PS:- | " .
		   ($::testing ? "$prefix" : "chroot $prefix/ ") .
		   "$lpr -s $printer->{SPOOLER} -P $queue");
	} else {
	    run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
				"-P", $queue, $page);
	}
    }
    sleep 5; 
    # Check whether the job is queued
    local *F; 
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lpq -s $printer->{SPOOLER} -P $queue |";
    my @lpq_output =
	grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } <F>;
    close F;
    @lpq_output;
}

sub lphelp_output {
    my ($printer) = @_;
    my $queue = $printer->{QUEUE};
    my $lphelp = "/usr/bin/lphelp";

    local *F; 
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lphelp $queue |";
    $helptext = join("", <F>);
    close F;
    if (!$helptext || ($helptext eq "")) {
	$helptext = "Option list not available!\n";
    }
    return $helptext;
}

sub pdqhelp_output {
    my ($printer) = @_;
    my $queue = $printer->{QUEUE};
    my $pdq = "/usr/bin/pdq";

    local *F; 
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$pdq -h -P $queue  2>&1 |";
    $helptext = join("", <F>);
    close F;
    return $helptext;
}

sub print_optionlist {
    my ($printer) = @_;
    my $queue = $printer->{QUEUE};
    my $lpr = "/usr/bin/foomatic-printjob";

    # Print the option list pages
    if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
        run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
			    "-P", $queue, "-o", "docs",
			    "/etc/bashrc");
    } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
	system(($::testing ? "$prefix" : "chroot $prefix/ ") .
	       "/usr/bin/lphelp $queue | " .
	       ($::testing ? "$prefix" : "chroot $prefix/ ") .
	       "$lpr -s $printer->{SPOOLER} -P $queue");
    }
}

# ---------------------------------------------------------------
#
# Spooler config stuff
#
# ---------------------------------------------------------------

sub get_copiable_queues {
    my ($oldspooler, $newspooler) = @_;
    local $_; 

    local *QUEUEOUTPUT; 
                        
    my @queuelist;      
    # Get queue list with foomatic-configure
    open QUEUEOUTPUT, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	    "foomatic-configure -Q -q -s $oldspooler |" ||
		die "Could not run foomatic-configure";

    my $entry = {};
    my $inentry = 0;
    while (<QUEUEOUTPUT>) {
	chomp;
	if ($inentry) {
	    # We are inside a queue entry
	    if (m!^\s*</queue>\s*$!) {
		# entry completed
		$inentry = 0;
		if (($entry->{foomatic}) && 
		    ($entry->{spooler} eq $oldspooler)) {
		    # Is the connection type supported by the new
		    # spooler?
		    if ((($newspooler eq "cups") &&
			 (($entry->{connect} =~ /^file:/) ||
			  ($entry->{connect} =~ /^ptal:/) ||
			  ($entry->{connect} =~ /^lpd:/) ||
			  ($entry->{connect} =~ /^socket:/) ||
			  ($entry->{connect} =~ /^smb:/) ||
			  ($entry->{connect} =~ /^ipp:/))) ||
			((($newspooler eq "lpd") ||
			  ($newspooler eq "lprng")) &&
			 (($entry->{connect} =~ /^file:/) ||
			  ($entry->{connect} =~ /^ptal:/) ||
			  ($entry->{connect} =~ /^lpd:/) ||
			  ($entry->{connect} =~ /^socket:/) ||
			  ($entry->{connect} =~ /^smb:/) ||
			  ($entry->{connect} =~ /^ncp:/) ||
			  ($entry->{connect} =~ /^postpipe:/))) ||
			(($newspooler eq "pdq") &&
			 (($entry->{connect} =~ /^file:/) ||
			  ($entry->{connect} =~ /^ptal:/) ||
			  ($entry->{connect} =~ /^lpd:/) ||
			  ($entry->{connect} =~ /^socket:/)))) {
			push(@queuelist, $entry->{name});
		    }
		}
		$entry = {};
	    } elsif (m!^\s*<name>(.+)</name>\s*$!) {
		    # queue name
		    $entry->{name} = $1;
	    } elsif (m!^\s*<connect>(.+)</connect>\s*$!) {
		    # connection type (URI)
		    $entry->{connect} = $1;
	    }
	} else {
	    if (m!^\s*<queue\s+foomatic\s*=\s*\"?(\d+)\"?\s*spooler\s*=\s*\"?(\w+)\"?\s*>\s*$!) {
		# new entry
		$inentry = 1;
		$entry->{foomatic} = $1;
		$entry->{spooler} = $2;
	    }
	}
    }
    close QUEUEOUTPUT;
    
    return @queuelist;
}

sub copy_foomatic_queue {
    my ($printer, $oldqueue, $oldspooler, $newqueue) = @_;
    run_program::rooted($prefix, "foomatic-configure", "-q",
			"-s", $printer->{SPOOLER},
			"-n", $newqueue,
			"-C", $oldspooler, $oldqueue);
}

# ------------------------------------------------------------------
#
# Configuration of HP multi-function devices
#
# ------------------------------------------------------------------

sub configure_hpoj {
    my ($device, @autodetected) = @_;
    # Get the model ID as auto-detected
    $device =~ m!^/dev/\S*lp(\d+)$!;
    my $model = $1;
    my $device_ok = 1;
    foreach (@autodetected) {
	$device eq $_->{port} or next;
	$model = $_->{val}{MODEL};
	# Check if the device is really an HP multi-function device
	stop_service("hpoj");
	my $bus;
	if ($device =~ /usb/) {
	    $bus = "usb";
	} else {
	    $bus = "par";
	}
	run_program::rooted($prefix, 
			    "ptal-mlcd", "$bus:probe", "-device", 
			    "$device");
	$device_ok = 0;
	local *F; 
	if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/ptal-devid mlc:$bus:probe |") {
	    my $devid = join("", <F>);
	    close F;
	    if ($devid) {$device_ok = 1};
	}
	if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "ps auxwww | grep \"ptal-mlcd $bus:probe\" | grep -v grep | ") {
	    my $line = <F>;
	    if ($line =~ /^\s*\S+\s+(\d+)\s+/) {
		my $pid = $1;
		kill (15, $pid);
	    }
	    close F;
	}
	start_service("hpoj");
	last;
    }
    # No, it is not an HP multi-function device.
    return "" if (!$device_ok);
    #$device = "/dev/usb/lp1"; $model = "DeskJet 990C";
    # Read the HPOJ config file and check whether this device is already
    # configured
    my $deviceconfigured = 0;
    my $ptaldevice;
    my $hpoj_config = "/etc/ptal-start.conf";
    local *HPOJCONFIG; 
    if (open HPOJCONFIG, ("< $prefix$hpoj_config")) {
	while ($line = <HPOJCONFIG>) {
	    chomp $line;
	    # Comment or blank line
	    next if (($line =~ /^\s*\#/) || ($line =~ /^\s*$/));
	    # Only lines beginning with "ptal-mlcd" are interesting.
	    next if ($line !~ /^\s*ptal-mlcd\s+(\S+)\s+/);
	    $ptaldevice = "mlc:$1";
	    if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
		# Parallel device
		next if ($device =~ /usb/);
		if ($line =~ m!-device\s+$device!) {
		    # Our new device is parallel and already configured
		    # by the current line
		    $deviceconfigured = 1;
		    last;
		}
	    } elsif ($ptaldevice =~ /^mlc:usb:(.+)$/) {
		# USB device
		next if ($device !~ /usb/);
		if ($line =~ /-devidmatch\s+(\"[^\"]*\")/) {
		    $configuredmodel = $1;
		    $configuredmodel =~ s/\"//g;
		    $configuredmodel =~ s/^mdl://;
		    $configuredmodel =~ s/^model://;
		    $configuredmodel =~ s/;$//;
		    if ($configuredmodel eq $model) {
			# Our new device is USB and already configured
			# by the current line
			$deviceconfigured = 1;
			last;
		    }
		} elsif ($line =~ m!-device\s+(/dev/usb/lp\d+)!) {
		    if ($1 eq $device) {
			# Our new device is USB and already configured
			# by the current line
			$deviceconfigured = 1;
			last;
		    }
		}
	    }
	}
	close HPOJCONFIG;
    }

    # It's all done for us, the device is already configured
    return $ptaldevice if $deviceconfigured;

    # Configure the device
    my $entry;
    if ($device =~ /usb/) {
	# USB device
	my $ptaldevicemodel = $model;
	$ptaldevicemodel =~ s/\s+/_/g;
	if ($model =~ /^\d+$/) {
	    $entry = "\nptal-mlcd usb:$ptaldevicemodel -device $device \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
	} else {
	    $entry = "\nptal-mlcd usb:$ptaldevicemodel -device /dev/usb/lp* -devidmatch \"$model;\" \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
	}
	$ptaldevice = "mlc:usb:$ptaldevicemodel";
    } else {
	# parallel device
	# auto-detect the parallel port addresses
	$device =~ m!^/dev/lp(\d+)$!;
	my $portnumber = $1;
	my $parport_addresses = 
	    `cat /proc/sys/dev/parport/parport$portnumber/base-addr`;
	my $address_arg;
	if ($parport_addresses =~ /^\s*(\d+)\s+(\d+)\s*$/) {
	    $address_arg = sprintf(" -base 0x%x -basehigh 0x%x", $1, $2);
	} elsif ($parport_addresses =~ /^\s*(\d+)\s*$/) {
	    $address_arg = sprintf(" -base 0x%x", $1);
	} else {
	    $address_arg = "";
	}
	$entry = "\nptal-mlcd par:$portnumber -device $device$address_arg \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:par:$portnumber \$PTAL_PRINTD_CMDLINE_APPEND\n";
	$ptaldevice = "mlc:par:$portnumber";
    }

    # Add new entry to HPOJ's config file
    open(HPOJCONFIG,">> $prefix$hpoj_config") ||
	die "Could not open $hpoj_config for writing!\n";
    print HPOJCONFIG $entry;
    close HPOJCONFIG;
    # Restart HPOJ
    restart_service("hpoj");
    # Return HPOJ device name to form the URI
    return $ptaldevice;
}

sub config_sane {
    my ($ptaldevice) = @_;

    # Create config file for HP backend
    output("$prefix/etc/sane.d/hp.conf",
	   "$ptaldevice\noption connect-ptal\n");

    # Add HP backend to /etc/sane.d/dll.conf if needed
    return if member("hp", chomp_(cat_("$prefix/etc/sane.d/dll.conf")));
    local *F;
    open F, ">> $prefix/etc/sane.d/dll.conf" or 
	die "can't write SANE config in /etc/sane.d/dll.conf: $!";
    print F "hp\n";
    close F;
}

# ------------------------------------------------------------------
#
# Configuration of printers in Applications
#
# ------------------------------------------------------------------

sub configureapplications {
    my ($printer) = @_;
    configurestaroffice($printer);
    configureopenoffice($printer);
}

sub addcupsremotetoapplications {
    my ($printer, $queue) = @_;
    return (addcupsremotetostaroffice($printer, $queue) &&
	    addcupsremotetoopenoffice($printer, $queue));
}

sub removeprinterfromapplications {
    my ($printer, $queue) = @_;
    return (removeprinterfromstaroffice($printer, $queue) &&
	    removeprinterfromopenoffice($printer, $queue));
}

sub removelocalprintersfromapplications {
    my ($printer) = @_;
    removelocalprintersfromstaroffice($printer);
    removelocalprintersfromopenoffice($printer);
}

sub configurestaroffice {
    my ($printer) = @_;
    # Do we have Star Office installed?
    my $configfilename = findsofficeconfigfile();
    return 1 if !$configfilename;
    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
    my $configprefix = $1;
    # Load Star Office printer config file
    my $configfilecontent = readsofficeconfigfile($configfilename);
    # Update remote CUPS queues
    if (0 && ($printer->{SPOOLER} eq "cups") && 
	(-x "$prefix/usr/bin/curl")) {
	my @printerlist = getcupsremotequeues();
	for my $listentry (@printerlist) {
	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
	    my $queue = $1;
	    my $server = $2;
	    eval(run_program::rooted
		 ($prefix, "curl", "-o", "/etc/foomatic/$queue.ppd",
		  "http://$server:631/printers/$queue.ppd"));
	    if (-r "$prefix/etc/foomatic/$queue.ppd") {
		$configfilecontent = 
		    makestarofficeprinterentry($printer, $queue,
					       $configprefix,
					       $configfilecontent);
	    }
	}
    }
    # Update local printer queues
    for my $queue (keys(%{$printer->{configured}})) {
	# Check if we have a PPD file
	if (! -r "$prefix/etc/foomatic/$queue.ppd") {
	    if (-r "$prefix/etc/cups/ppd/$queue.ppd") {
		# If we have a PPD file in the CUPS config dir, link to it
		run_program::rooted($prefix, 
				    "ln", "-sf",
				    "/etc/cups/ppd/$queue.ppd",
				    "/etc/foomatic/$queue.ppd");
	    } elsif (-r "$prefix/usr/share/postscript/ppd/$queue.ppd") {
		# Check PPD directory of GPR, too
		run_program::rooted($prefix, 
				    "ln", "-sf",
				    "/usr/share/postscript/ppd/$queue.ppd",
				    "/etc/foomatic/$queue.ppd");
	    } else {
		# No PPD file at all? We cannot set up this printer
		next;
	    }
	}
	$configfilecontent = 
	    makestarofficeprinterentry($printer, $queue, $configprefix,
				       $configfilecontent);
    }
    # Patch PostScript output to print Euro symbol correctly also for
    # the "Generic Printer"
    $configfilecontent = removeentry
	("ports", "default_queue=", $configfilecontent);
    $configfilecontent = addentry
	("ports",
	 "default_queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}}",
	 $configfilecontent);
    # Write back Star Office configuration file
    return writesofficeconfigfile($configfilename, $configfilecontent);
}

sub configureopenoffice {
    my ($printer) = @_;
    # Do we have OpenOffice.org installed?
    my $configfilename = findopenofficeconfigfile();
    return 1 if !$configfilename;
    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
    my $configprefix = $1;
    # Load OpenOffice.org printer config file
    my $configfilecontent = readsofficeconfigfile($configfilename);
    # Update remote CUPS queues
    if (0 && ($printer->{SPOOLER} eq "cups") && 
	(-x "$prefix/usr/bin/curl")) {
	my @printerlist = getcupsremotequeues();
	for my $listentry (@printerlist) {
	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
	    my $queue = $1;
	    my $server = $2;
	    eval(run_program::rooted
		 ($prefix, "curl", "-o", "/etc/foomatic/$queue.ppd",
		  "http://$server:631/printers/$queue.ppd"));
	    if (-r "$prefix/etc/foomatic/$queue.ppd") {
		$configfilecontent = 
		    makeopenofficeprinterentry($printer, $queue,
					       $configprefix,
					       $configfilecontent);
	    }
	}
    }
    # Update local printer queues
    for my $queue (keys(%{$printer->{configured}})) {
	# Check if we have a PPD file
	if (! -r "$prefix/etc/foomatic/$queue.ppd") {
	    if (-r "$prefix/etc/cups/ppd/$queue.ppd") {
		# If we have a PPD file in the CUPS config dir, link to it
		run_program::rooted($prefix, 
				    "ln", "-sf",
				    "/etc/cups/ppd/$queue.ppd",
				    "/etc/foomatic/$queue.ppd");
	    } elsif (-r "$prefix/usr/share/postscript/ppd/$queue.ppd") {
		# Check PPD directory of GPR, too
		run_program::rooted($prefix, 
				    "ln", "-sf",
				    "/usr/share/postscript/ppd/$queue.ppd",
				    "/etc/foomatic/$queue.ppd");
	    } else {
		# No PPD file at all? We cannot set up this printer
		next;
	    }
	}
	$configfilecontent = 
	    makeopenofficeprinterentry($printer, $queue, $configprefix,
				       $configfilecontent);
    }
    # Patch PostScript output to print Euro symbol correctly also for
    # the "Generic Printer"
    $configfilecontent = removeentry
	("Generic Printer", "Command=", $configfilecontent);
    $configfilecontent = addentry
	("Generic Printer", 
	 "Command=/usr/bin/perl -p -e \"s=/euro /unused=/Euro /unused=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}}",
	 $configfilecontent);
    # Write back OpenOffice.org configuration file
    return writesofficeconfigfile($configfilename, $configfilecontent);
}

sub addcupsremotetostaroffice {
    my ($printer, $queue) = @_;
    # Do we have Star Office installed?
    my $configfilename = findsofficeconfigfile();
    return 1 if !$configfilename;
    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
    my $configprefix = $1;
    # Load Star Office printer config file
    my $configfilecontent = readsofficeconfigfile($configfilename);
    # Update remote CUPS queues
    if (($printer->{SPOOLER} eq "cups") && 
	(-x "$prefix/usr/bin/curl")) {
	my @printerlist = getcupsremotequeues();
	for my $listentry (@printerlist) {
	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
	    my $q = $1;
	    next if ($q ne $queue);
	    my $server = $2;
	    # Remove server name from queue name
	    $q =~ s/^([^@]*)@.*$/$1/;
	    eval(run_program::rooted
		 ($prefix, "/usr/bin/curl", "-o",
		  "/etc/foomatic/$queue.ppd",
		  "http://$server:631/printers/$q.ppd"));
	    # Does the file exist and is it not an error message?
	    if ((-r "$prefix/etc/foomatic/$queue.ppd") &&
		(cat_("$prefix/etc/foomatic/$queue.ppd") =~ 
		 /^\*PPD-Adobe/)) {
		$configfilecontent = 
		    makestarofficeprinterentry($printer, $queue,
					       $configprefix,
					       $configfilecontent);
	    } else {
		return 0;
	    }
	    last;
	}
    }
    # Write back Star Office configuration file
    return writesofficeconfigfile($configfilename, $configfilecontent);
}

sub addcupsremotetoopenoffice {
    my ($printer, $queue) = @_;
    # Do we have OpenOffice.org installed?
    my $configfilename = findopenofficeconfigfile();
    return 1 if !$configfilename;
    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
    my $configprefix = $1;
    # Load OpenOffice.org printer config file
    my $configfilecontent = readsofficeconfigfile($configfilename);
    # Update remote CUPS queues
    if (($printer->{SPOOLER} eq "cups") && 
	(-x "$prefix/usr/bin/curl")) {
	my @printerlist = getcupsremotequeues();
	for my $listentry (@printerlist) {
	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
	    my $q = $1;
	    next if ($q ne $queue);
	    my $server = $2;
	    # Remove server name from queue name
	    $q =~ s/^([^@]*)@.*$/$1/;
	    eval(run_program::rooted
		 ($prefix, "/usr/bin/curl", "-o",
		  "/etc/foomatic/$queue.ppd",
		  "http://$server:631/printers/$q.ppd"));
	    # Does the file exist and is it not an error message?
	    if ((-r "$prefix/etc/foomatic/$queue.ppd") &&
		(cat_("$prefix/etc/foomatic/$queue.ppd") =~ 
		 /^\*PPD-Adobe/)) {
		$configfilecontent = 
		    makeopenofficeprinterentry($printer, $queue,
					       $configprefix,
					       $configfilecontent);
	    } else {
		return 0;
	    }
	}
    }
    # Write back OpenOffice.org configuration file
    return writesofficeconfigfile($configfilename, $configfilecontent);
}

sub removeprinterfromstaroffice {
    my ($printer, $queue) = @_;
    # Do we have Star Office installed?
    my $configfilename = findsofficeconfigfile();
    return 1 if !$configfilename;
    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
    my $configprefix = $1;
    # Load Star Office printer config file
    my $configfilecontent = readsofficeconfigfile($configfilename);
    # Remove the printer entry
    $configfilecontent = 
	removestarofficeprinterentry($printer, $queue, $configprefix,
				     $configfilecontent);
    # Write back Star Office configuration file
    return writesofficeconfigfile($configfilename, $configfilecontent);
}

sub removeprinterfromopenoffice {
    my ($printer, $queue) = @_;
    # Do we have OpenOffice.org installed?
    my $configfilename = findopenofficeconfigfile();
    return 1 if !$configfilename;
    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
    my $configprefix = $1;
    # Load OpenOffice.org printer config file
    my $configfilecontent = readsofficeconfigfile($configfilename);
    # Remove the printer entry
    $configfilecontent = 
	removeopenofficeprinterentry($printer, $queue, $configprefix,
				     $configfilecontent);
    # Write back OpenOffice.org configuration file
    return writesofficeconfigfile($configfilename, $configfilecontent);
}

sub removelocalprintersfromstaroffice {
    my ($printer) = @_;
    # Do we have Star Office installed?
    my $configfilename = findsofficeconfigfile();
    return 1 if !$configfilename;
    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
    my $configprefix = $1;
    # Load Star Office printer config file
    my $configfilecontent = readsofficeconfigfile($configfilename);
    # Remove the printer entries
    for my $queue (keys(%{$printer->{configured}})) {
	$configfilecontent = 
	    removestarofficeprinterentry($printer, $queue, $configprefix,
					 $configfilecontent);
    }
    # Write back Star Office configuration file
    return writesofficeconfigfile($configfilename, $configfilecontent);
}

sub removelocalprintersfromopenoffice {
    my ($printer) = @_;
    # Do we have OpenOffice.org installed?
    my $configfilename = findopenofficeconfigfile();
    return 1 if !$configfilename;
    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
    my $configprefix = $1;
    # Load OpenOffice.org printer config file
    my $configfilecontent = readsofficeconfigfile($configfilename);
    # Remove the printer entries
    for my $queue (keys(%{$printer->{configured}})) {
	$configfilecontent = 
	    removeopenofficeprinterentry($printer, $queue, $configprefix,
					 $configfilecontent);
    }
    # Write back OpenOffice.org configuration file
    return writesofficeconfigfile($configfilename, $configfilecontent);
}

sub makestarofficeprinterentry {
    my ($printer, $queue, $configprefix, $configfile) = @_;
    # Set default printer
    if ($queue eq $printer->{DEFAULT}) {
	$configfile = removeentry("windows", "device=", $configfile);
	$configfile = addentry("windows", 
			       "device=$queue,$queue PostScript,$queue",
			       $configfile);
    }
    # Make an entry in the "[devices]" section
    $configfile = removeentry("devices", "$queue=", $configfile);
    $configfile = addentry("devices", 
			   "$queue=$queue PostScript,$queue",
			   $configfile);
    # Make an entry in the "[ports]" section
    # The "perl" command patches the PostScript output to print the Euro
    # symbol correctly.
    $configfile = removeentry("ports", "$queue=", $configfile);
    $configfile = addentry("ports", 
			   "$queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}} -P $queue",
			   $configfile);
    # Make printer's section
    $configfile = addsection("$queue,PostScript,$queue", $configfile);
    # Load PPD file
    my $ppd = cat_("$prefix/etc/foomatic/$queue.ppd");
    # Set the PostScript level
    my $pslevel;
    if ($ppd =~ /^\s*\*LanguageLevel:\s*\"?([^\s\"]+)\"?\s*$/m) {
	$pslevel = $1;
	$pslevel = "2" if $pslevel eq "3";
    } else {
	$pslevel = "2";
    }
    $configfile = removeentry("$queue.PostScript.$queue",
			      "Level=", $configfile);
    $configfile = addentry("$queue.PostScript.$queue", 
			   "Level=$pslevel", $configfile);
    # Set Color/BW
    my $color;
    if ($ppd =~ /^\s*\*ColorDevice:\s*\"?([Tt]rue)\"?\s*$/m) {
	$color = "1";
    } else {
	$color = "0";
    }
    $configfile = removeentry("$queue.PostScript.$queue",
			      "BitmapColor=", $configfile);
    $configfile = addentry("$queue.PostScript.$queue", 
			   "BitmapColor=$color", $configfile);
    # Set the default paper size
    if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
	my $papersize=$1;
	$configfile = removeentry("$queue.PostScript.$queue",
				  "PageSize=", $configfile);
	$configfile = removeentry("$queue.PostScript.$queue",
				  "PPD_PageSize=", $configfile);
	$configfile = addentry("$queue.PostScript.$queue", 
			       "PageSize=$papersize", $configfile);
	$configfile = addentry("$queue.PostScript.$queue", 
			       "PPD_PageSize=$papersize", $configfile);
    }
    # Link the PPD file
    run_program::rooted($prefix, 
			"ln", "-sf", "/etc/foomatic/$queue.ppd", 
			"$configprefix/share/xp3/ppds/$queue.PS");
    return $configfile;
}

sub makeopenofficeprinterentry {
    my ($printer, $queue, $configprefix, $configfile) = @_;
    # Make printer's section
    $configfile = addsection($queue, $configfile);
    # Load PPD file
    my $ppd = cat_("$prefix/etc/foomatic/$queue.ppd");
    # "PPD_PageSize" line
    if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
	my $papersize=$1;
	$configfile = removeentry($queue,
				  "PPD_PageSize=", $configfile);
	$configfile = addentry($queue, 
			       "PPD_PageSize=$papersize", $configfile);
    }
    # "Command" line
    # The "perl" command patches the PostScript output to print the Euro
    # symbol correctly.
    $configfile = removeentry($queue, "Command=", $configfile);
    $configfile = addentry($queue, 
			   "Command=/usr/bin/perl -p -e \"s=/euro /unused=/Euro /unused=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}} -P $queue",
			   $configfile);
    # "Comment" line 
    $configfile = removeentry($queue, "Comment=", $configfile);
    if (($printer->{configured}{$queue}) &&
	($printer->{configured}{$queue}{queuedata}{desc})) {
	$configfile = addentry
	    ($queue, 
	     "Comment=$printer->{configured}{$queue}{queuedata}{desc}",
	     $configfile);
    } else {
	$configfile = addentry($queue, 
			       "Comment=",
			       $configfile);
    }
    # "Location" line 
    $configfile = removeentry($queue, "Location=", $configfile);
    if (($printer->{configured}{$queue}) &&
	($printer->{configured}{$queue}{queuedata}{loc})) {
	$configfile = addentry
	    ($queue, 
	     "Location=$printer->{configured}{$queue}{queuedata}{loc}",
	     $configfile);
    } else {
	$configfile = addentry($queue, 
			       "Location=",
			       $configfile);
    }
    # "DefaultPrinter" line
    $configfile = removeentry($queue, "DefaultPrinter=", $configfile);
    my $default = "0";
    if ($queue eq $printer->{DEFAULT}) {
	$default = "1";
    }
    $configfile = addentry($queue, 
			   "DefaultPrinter=$default",
			   $configfile);
    # "Printer" line 
    $configfile = removeentry($queue, "Printer=", $configfile);
    $configfile = addentry($queue, 
			   "Printer=$queue/$queue",
			   $configfile);
    # Link the PPD file
    run_program::rooted($prefix, 
			"ln", "-sf", "/etc/foomatic/$queue.ppd", 
			"$configprefix/share/psprint/driver/$queue.PS");
    return $configfile;
}

sub removestarofficeprinterentry {
    my ($printer, $queue, $configprefix, $configfile) = @_;
    # Remove default printer entry
    $configfile = removeentry("windows", "device=$queue,", $configfile);
    # Remove entry in the "[devices]" section
    $configfile = removeentry("devices", "$queue=", $configfile);
    # Remove entry in the "[ports]" section
    $configfile = removeentry("ports", "$queue=", $configfile);
    # Remove "[$queue,PostScript,$queue]" section
    $configfile = removesection("$queue,PostScript,$queue", $configfile);
    # Remove Link of PPD file
    run_program::rooted($prefix, 
			"rm", "-f", 
			"$configprefix/share/xp3/ppds/$queue.PS");
    return $configfile;
}

sub removeopenofficeprinterentry {
    my ($printer, $queue, $configprefix, $configfile) = @_;
    # Remove printer's section
    $configfile = removesection("$queue", $configfile);
    # Remove Link of PPD file
    run_program::rooted($prefix, 
			"rm", "-f", 
			"$configprefix/share/psprint/driver/$queue.PS");
    return $configfile;
}

sub findsofficeconfigfile {
    my @configfilenames = 
	("/usr/lib/*/share/xp3/Xpdefaults",
	 "/usr/local/lib/*/share/xp3/Xpdefaults",
	 "/usr/local/*/share/xp3/Xpdefaults",
	 "/opt/*/share/xp3/Xpdefaults");
    my $configfilename = "";
    for $configfilename (@configfilenames) {
	local *F;
	if (open F, "ls -r $prefix$configfilename 2> /dev/null |") {
	    my $filename = <F>;
	    close F;
	    if ($filename) {return $filename};
	}
    }
    return "";
}

sub findopenofficeconfigfile {
    my @configfilenames =
	("/usr/lib/*/share/psprint/psprint.conf",
	 "/usr/local/lib/*/share/psprint/psprint.conf",
	 "/usr/local/*/share/psprint/psprint.conf",
	 "/opt/*/share/psprint/psprint.conf");
    my $configfilename = "";
    for $configfilename (@configfilenames) {
	local *F;
	if (open F, "ls -r $prefix$configfilename 2> /dev/null |") {
	    my $filename = <F>;
	    close F;
	    if ($filename) {return $filename};
	}
    }
    return "";
}

sub readsofficeconfigfile {
    my ($file) = @_;
    local *F; 
    open F, "< $prefix$file" || return "";
    my $filecontent = join("", <F>);
    close F;
    return $filecontent;
}

sub writesofficeconfigfile {
    my ($file, $filecontent) = @_;
    local *F; 
    open F, "> $prefix$file" || return 0;
    print F $filecontent;
    close F;
    return 1;
}

sub getcupsremotequeues {
    # The following code reads in a list of all remote printers which the
    # local CUPS daemon knows due to broadcasting of remote servers or 
    # "BrowsePoll" entries in the local /etc/cups/cupsd.conf
    local *F;
    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
	"lpstat -v |" || return ();
    my @printerlist = ();
    my $line;
    while ($line = <F>) {
	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
	    my $queuename = $1;
	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
		(!$printer->{configured}{$queuename})) {
		my $server = $1;
		push (@printerlist, "$queuename|$server");
	    }
	}
    }
    close F;
    return @printerlist;
}

sub addentry {
    my ($section, $entry, $filecontent) = @_;
    my $sectionfound = 0;
    my $entryinserted = 0;
    my @lines = split("\n", $filecontent);
    local $_;
    for (@lines) {
	if (!$sectionfound) {
	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
		$sectionfound = 1;
	    }
	} else {
	    if (($_ !~ /^\s*$/) && ($_ !~ /^\s*;/)) {
		$_ = "$entry\n$_";
		$entryinserted = 1;
		last;
	    }
	}
    }
    if ($sectionfound && !$entryinserted) {
	push(@lines, $entry);
    }
    return join ("\n", @lines);
}

sub addsection {
    my ($section, $filecontent) = @_;
    my $entryinserted = 0;
    my @lines = split("\n", $filecontent);
    local $_;
    for (@lines) {
	if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
	    # section already there, nothing to be done
	    return $filecontent;
	}
    }
    return $filecontent . "\n[$section]";
}

sub removeentry {
    my ($section, $entry, $filecontent) = @_;
    my $sectionfound = 0;
    my $done = 0;
    my @lines = split("\n", $filecontent);
    local $_;
    for (@lines) {
	$_ = "$_\n";
	next if ($done);
	if (!$sectionfound) {
	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
		$sectionfound = 1;
	    }
	} else {
	    if ($_ =~ /^\s*\[.*\]\s*$/) { # Next section
		$done = 1;
	    } elsif ($_ =~ /^\s*$entry/) {
		$_ = "";
		$done = 1;
	    }
	}
    }
    return join ("", @lines);
}

sub removesection {
    my ($section, $filecontent) = @_;
    my $sectionfound = 0;
    my $done = 0;
    my @lines = split("\n", $filecontent);
    local $_;
    for (@lines) {
	$_ = "$_\n";
	next if ($done);
	if (!$sectionfound) {
	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
		$_ = "";
		$sectionfound = 1;
	    }
	} else {
	    if ($_ =~ /^\s*\[.*\]\s*$/) { # Next section
		$done = 1;
	    } else {
		$_ = "";
	    }
	}
    }
    return join ("", @lines);
}




1;
